Other Displays - Omron SYSDRIVE MX2 SERIES User Manual

Other Displays

Name
Reset
Undervoltage standby
Restart during
momentary power
interruption, restart
during trip
RUN command is
limited
Setting initialization
Fault monitor being
initialized
No data
Communications error
Auto-tuning OK
Auto-tuning NG
SYSDRIVE MX2 Series USER'S MANUAL (3G3MX2-Axxxx)
7-1 Error Display and Remedial Actions
Description
This warning appears if the input terminal set
to Reset (RS) is ON or a trip has been reset
using the STOP/RESET key.
Appears in undervoltage standby condition or
with the power shut off.
Restart function is in operation.
Appears if the limited RUN command is
received from the control terminal while the
RUN direction is limited with b035.
Appears while the set values are being
initialized.
[ 00]: Setting for Japan
Appears while the fault monitor is being
initialized.
Appears when no applicable data is available
(a trip has not yet occurred in the fault
monitor mode).
Appears if an error occurs between the
Remote Operator and the Inverter.
Appears upon successful completion of
auto-tuning.
Appears upon failure of auto-tuning.
Display on Digital Operator
Turns.
xkxkxkx
-k-k-k-
okokoko
OkOkOkO
0k0
hkc
_k_k_k_
Flashes.
=k=k=k=
_k_k_ko
_k_k_kz
7-8
7