4-11 Other Useful Functions - Omron 3G3MX2 Series User Manual

4 Drive Programming Editor

4-11 Other Useful Functions

Converting Flowchart to Text
There are two ways to convert flowchart programs to text programs.
Command
Convert Flowchart to Text
Convert Whole Program
to Text
Precautions for Correct Use
• When a flowchart program is converted to a text program, the program is once compiled. If a
compilation error occurs, the conversion fails.
• On the upper left of each block in the flowchart program, the block number will appear after
the compilation is finished.
Block numbers are the consecutive numbers starting with "0". A block number is given to
each block of the whole program.
Block numbers do not match the line numbers of the program converted to text.
Converting Text to Flowchart
There are two ways to convert text programs to flowchart programs.
Command
Convert Text to Flowchart
Convert Whole Program
to Flowchart
Precautions for Correct Use
• When a text program is converted to a flowchart program, the program is once compiled. If a
compilation error occurs, the conversion fails.
• On the upper left of each block in the flowchart program, the block number will appear after
the compilation is finished.
Block numbers are the consecutive numbers starting with "0". A block number is given to
each block of the whole program.
Block numbers do not match the line numbers of the program converted to text.
• Comments, alias definition, region definition, etc. created in the text program are deleted
when a compilation is performed for conversion. The operation does not change, however,
the forms and contents of the program are partially changed.
4 - 28
Icon
Converts current flowchart task or subroutine to text.
Converts whole program to text.
Icon
Converts current text task or subroutine to flowchart.
Converts whole program to flowchart.
Description
Description
Drive Programming User's Manual (I580-E2)