Outcall Notification - Tadiran Telecom Emerald ICE User Manual

If a telephone is used, the outcalled telephone will ring and the recipient will be hear
prompts to retrieve messages.
7-10
Emerald ICE Flash Voice Mail User Guide

Outcall Notification

You can use the optional outcall notification feature to have the system call your
pager and notify you that a new message has been received in your mailbox. Your
system administrator will set up your notification schedule and program your
beeper or telephone number.
The Outcall feature allows a beeper or telephone to be contacted when a Voice Mail
message is received.
If a beeper is used, the extension number of the Voice Mail sender will be displayed
on the beeper.
Automatic Day/Night Change
This feature is available if using Emerald ICE KSU Software version K24UT"1".XXX and higher. If the
KSU version is K24UT"0".XXX, this will not be availble. Check with your System Administrator for
further details.
The Automatic Day/Night mode change on the Emerald ICE Flash Voice Mail System is
a feature that automatically changes the modes used for your Day and Night
greetings, when the Emerald ICE system time changes.
Refer to the Emerald ICE Flash Voice Mail Card Installation & Maintenance Manual if you
are using earlier verision of the Emerald ICE KSU software and would like to
manually change the Day/Night modes.