CX-3
®
Emergency Engine Shutdown
(A)
Place Engine Master Switch in
the OFF position.
Cleanup
CAUTION
NOTE:
(A)
Verify the engine is off and cool
before beginning to clean. Clean
the CX-3
®
with soap and water.
(D)
Clean water system outlets, includ-
ing water tubes in blade guard.
Move the Throttle Lever to lower
blade speed. Place Fuel Valve in
Engine parts are extremely hot following use, allow engine to cool 1/2-hour
before cleaning. Use care during cleanup to avoid injury.
1. To extend operating life, the Concrete Saw should be cleaned following every
use.
2. Using a garden hose or pressure washer is not advised as it can force water
into the air cleaner or muffler opening.
3. Use care when cleaning around electrical components.
Clean around the Console.
Clean the remainder of the exte-
rior surface (except the engine).
(B)
the OFF position.
(B)
(E)
20
CLEANUP
(C)
Clean the Depth Control Screw.