Maintenance And Troubleshooting - MK Diamond Products CX-3 Owner's Manual & Operating Instructions

Gas powered concrete saw
Table of Contents

Advertisement

CX-3
®
Check Fuel Level
For all Engine related maintenance and troubleshooting refer to the Engine Manual.
1. Gasoline is highly flammable and explosive. You can be burned or seriously
WARNING
2. To fuel, stop engine if running and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbeques, electric appliances,
5. Wipe up spills immediately.
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the
NOTE:
2. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
(A)
Remove the Fuel Cap. Refer to
Engine Manual for details.
Checking Oil Level
When installing the Oil Dipstick, ensure the threads are aligned with the threads of
NOTE:
the Oil Reservoir so as not to "cross-thread."
(A)
Verify the Engine is upright and
level. Refer to Engine Manual
for details.
injured when handling fuel.
power tools, etc.
fuel tank. Damage caused by spilled fuel IS NOT covered under the warranty.
Ensure fuel level is 1" below the
throat of the Fuel Tank.
1 inch (25mm)
from throat
Maximum
Fuel Level
(B)
24
MAINTENANCE
Maximum
Fuel Level
(C)
Ensure fuel level is below the
top of the strainer filter.

Advertisement

Table of Contents
loading

Table of Contents