Assembly - MK Diamond Products CX-3 Owner's Manual & Operating Instructions

CX-3
®
Filling Oil Reservoir
(A)
Verify the Oil Drain Cap is
installed onto the Oil Drain Line
and is tight. Refer to Engine
Manual for details.
Crank Wheel Handle Installation
(A)
Insert Crank Wheel Handle
mounting bolt up through hole in
crank wheel.
Pointer Installation
NOTE:
(A)
Insert bolt on Pointer into mount-
ing flange next to Blade Guard.
NOTE:
Thread Crank Wheel Handle
Limiting bracket properly installed will prevent pointer from contacting engine when
in the up position
Install limiting bracket onto bolt
The engine is shipped with no oil in the crankcase.
Refer to Engine Manual for details on type and
amount of oil required.
(B)
onto bolt.
(B)
as shown.
15

ASSEMBLY

(C)
Hold crank wheel handle and
tighten bolt with Allen wrench.
(C)
Thread locking nut on to bolt
and tighten.