Startup - MK Diamond Products CX-3 Owner's Manual & Operating Instructions

Gas powered concrete saw
Table of Contents

Advertisement

CX-3
®
Filling Fuel Tank
WARNING 1. Gasoline is highly flammable and explosive. You can be burned or seriously
2. To fuel, stop engine if running, and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbeques, electric appliances,
5. Wipe up spills immediately.
NOTE:
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the
2. DO NOT use stale or contaminated gasoline, or an oil/gasoline mixture.
(A)
Remove the Fuel Cap. Refer to
Engine Manual for details.
Pre-Start Inspection
The pre-start inspection should be performed before beginning any job. If Diamond Blade is worn,
replace the blade before starting work.
(A)
Inspect Blade for damage for
cracks Verify the Blade is correct
for the material being cut.
injured when handling fuel.
power tools, etc.
fuel tank. Damage caused by spilled fuel IS NOT covered under the warranty.
Ensure fuel level is 1" below the
Inspect Engine for leaks.
1 inch (25mm)
from throat
Maximum
Fuel Level
(B)
throat of the Fuel Tank.
(B)
16
START UP
Maximum
Fuel Level
(C)
Ensure fuel level is below the
top of the strainer filter.
(C)
Inspect the CX-3
®
for general
damage and/or loose hardware.

Advertisement

Table of Contents
loading

Table of Contents