Product Specifications - MK Diamond Products CX-3 Owner's Manual & Operating Instructions

CX-3
®

PRODUCT SPECIFICATIONS

The CX-3 is a versatile gas powered Concrete Saw. Operated and used according to this manual,
®
the CX-3 will provide years of dependable service.
®
General Description
The CX-3 is engineered as a portable concrete saw powered by a Subaru, Honda or Kohler gas
®
engine. The saw is capable of cutting up to five and half (5-1/2) inches in depth.
Motor and Weight Specifications
Motor and Weight specifications for the CX-3
Motor Type
Max RPM
Blade Speed
Fuel Tank Capacity
Engine Oil Capacity
Weight
Blade
The CX-3 uses a 12 to 14 inch diameter diamond blade.
®
Concrete Saw Usage
The CX-3 is designed to cut various grades of concrete surfaces.
®
Features
• Compact, lightweight, engineered for maneuverability and reliability
• Can be used for wet or dry cutting
• Corrosion resistant cast-aluminum blade guard
• Built-in water distribution system supplies water to both sides of blade
• Blade guard mounts on either left- or right-hand side of saw and cuts within 1" of wall or curb
• Sturdy single piece steel motor mount weldment to minimize vibration
• 1" diameter blade shaft with self aligning bearings
• Hinged blade guard provides easy access for blade changes and inspection
• Folding handle bar for compact transport
• Poly V-belt for positive power transmission
are listed below.
®
4-Stroke, Overhead valve, single cylinder
3600 RPM
3400 to 3600 RPM (Depending on Blade Diameter)
See Engine Manual for details
Approximately 116 lbs.
11
PRODUCT SPECIFICATION