The Timeout Menu; The Tray Switch Menu; The 1200 Dpi Menu - Xante Assel-a-Writer-8300 Instruction Manual

The Timeout Menu

MISCELLANEOUS
TIMEOUT
20 sec
The Timeout menu allows you to select the
40 SEC
60 sec
number of seconds the printer waits for
300 sec
never
additional incoming data before cancelling a
job and returning to the Ready/Idle state to
accept another job. This prevents an indefinite
tie-up on one job. The factory default is 40
SEC.
Select 300 or NEVER for large files, such as
graphic intensive or CAD (Computer Aided
Design) files. With the NEVER selection, the
printer does not time out; it continues to wait
for additional data.

The Tray Switch Menu

MISCELLANEOUS
TRAY SWITCH
OFF
The Tray Switch menu allows you to use the
normal
manual feed
printer's tray chaining feature. NORMAL
enables tray chaining to all installed paper
cassettes. MANUAL FEED enables tray
chaining to all installed paper cassettes and the
manual feed tray. The factory default is OFF,
which disables tray chaining. See "Tray
Chaining" in chapter 7.

The 1200 DPI Menu

MISCELLANEOUS
1200 DPI
ENABLE
The 1200 DPI menu allows you to turn on
disable
(ENABLE) or turn off (DISABLE) RAM set
aside for 1200 dpi printing. If your printer has
20 MB or more memory, the RAM is
configured to allow full frame buffering for
1200 dpi. If you do not have or do not want to
use 1200 dpi resolution, use this menu to
reallocate the memory. The factory default is
ENABLE.
5-16 Configurationbb ______________________________________