Xante Assel-a-Writer-8300 Instruction Manual page 240

4. Locate the transfer guide and clean off any dust and paper
residue by wiping the area with a soft, dry, lint-free, clean
cloth (fig. 10.2).
Fig. 10.2 Clean the Transfer Guide
5. Install the new toner cartridge and close the printer. (See "The
Toner Cartridge" in chapter 2 for details.)
6. Clean the printer's exterior using a clean, lint-free cloth
dampened with water, denatured alcohol, or a mild,
water-based detergent.
Caution: Never use ammonia-based cleaners on or around
the printer. This may cause permanent damage to
the toner cartridge or to the printer's plastic case.
Never spray or pour solutions directly on the
printer. Always put the solution on the cloth and
wipe the printer with the cloth. Make sure the
solution does not get inside the printer, ports, or
power cord areas.
7. Give the printer a few minutes for any damp areas to dry
thoroughly. Then, reconnect the printer to the power source.
9-6 Maintenance and Specificationsbb ________________________