Table of Contents
Advertisement
FreeHand 4.0: To change to the required PPD
1.
Choose Print from the File Menu.
2.
Click Print in the lower left corner (not the upper right) of the
Print Dialog Box. The Print Options window appears.
3.
Click Select PPD. A list of printers appears.
4.
Select your printer from the list. The pop-up menu closes.
5.
Select other desired options and then print from FreeHand as
you normally would.
QuarkXPress
The XANTÉ Utilities CD-ROM includes special printer description
files to use with QuarkXPress. Install the file required for the
program's version and your system environment.
Note: Load the XANTÉ PDF following the instructions in chapter
3 (Macintosh) or chapter 4 (PC). However, if you have
printing problems, you may want to try changing the PDF
selection to Generic B&W and set Page Size only at the top
of the QuarkXPress Page Setup dialog box. Also, if you use
a custom page size, it is best to use the Generic B&W
option.
QuarkXPress (PC)
QuarkXPress versions between 3.3 and 4.0 require a PDF (printer
description file) in addition to the PPD file. XANTÉ Utilities disks
include QuarkXPress PDF files for both the standard and wide
format printer options in the PDFs folder. We recommend that you
use these PDFs to obtain the best quality from your XANTÉ printer.
See "PDFs Folder" in chapter 4 for details about installing this file.
Note: QuarkXPress 4.0 does not need a PDF.
______________________
Application Notes and Page Design B-5
Advertisement
Chapters
Table of Contents
Troubleshooting
