Xinstaller - Xante Assel-a-Writer-8300 Instruction Manual

The Read1st.txt text file describes how to install Adobe Acrobat
Reader 3.0 from the CD-ROM.
The Readme.PDF file provides an overview of the Macintosh section
of the XANTÉ Utilities CD-ROM. This file can be opened using
Acrobat Reader 3.0.
The Screen Fonts folder contains the fonts used by XANTÉ PostScript
Level 2 printers for display on Macintosh screens. If you do not already
have these fonts, copy this folder into the System: Fonts folder on your
Macintosh.
The XANTÉ Utilities folder contains XANTÉ Command Center,
XANTÉ Linearizer, Adobe Downloader, and a Downloader Read Me
file. See "XInstaller" and the individual utility sections later in this
chapter for details.
XInstaller is an installation program for XANTÉ Command Center,
XANTÉ Linearizer, Adobe Downloader, PostScript PPDs for your
printer, and the appropriate PDF (Printer Description File) for
QuarkXPress (if it is installed on your system). XInstaller can be
configured to launch the AdobePS Printer Driver Installer when the
XANTÉ Utilities installation is complete. See "XInstaller" later in this
chapter.
Always check the Readme files on the CD-ROM for information that
was not available at the time this manual was printed.

XInstaller

XInstaller can be configured to install only the XANTÉ Utilities or to
install the utilities, your printer's PPD, your printer's QuarkXPress PDF
(if QuarkXPress is installed on your system), and launch the AdobePS
8.5.1 driver installer.
1. Insert the XANTÉ Utilities CD-ROM into your Macintosh.
XInstaller is launched automatically. To start the program
manually, open the XANTE Utilities folder on the CD-ROM
and double-click the XInstaller icon.
_____________________________________ Macintosh Setup 3-5