Xante Assel-a-Writer-8300 Instruction Manual page 177

Press the Enter ↓ key to select the desired option if it is not a
6.
numeric value. If it is numeric, use the Test ← key to lower or
the Menu → key to raise it to the desired amount; then, press
the Enter ↓ key.
When selected, the option's name changes from lowercase
letters to all capitalized letters. If you do not want to make
further selections, skip to step 8.
Use the Reset ↑, Test ←, Menu →, and the Enter ↓ keys to
7.
select other desired options. Repeat steps 2 and 6 until you
make all desired selections.
8. Press the On Line key to save the changes, and put the printer
back on line, ready for printing. READY/IDLE appears in the
window.
Example: Changing resolution from 600 x 600 dpi to 1200 x 1200 dpi
1. Make sure the printer is on and idle.
Press the MENU → key until SETUP:MISCELLANEOUS
2.
appears in the window.
Press the Enter ↓ key to select the Miscellaneous menu.
3.
Press the Menu → key until MISCELLANEOUS:DPI appears
4.
in the window.
Press the Enter ↓ key to enter the dpi menu.
5.
Press the Menu → key until dpi:1200 1200 appears.
6.
Press the Enter ↓ key to select dpi:1200 1200. The
7.
selection changes to all capital letters, DPI:1200 1200, in
the window.
8. Press the On Line key. READY/IDLE appears in the window.
The printer's default resolution is now 1200 x 1200 dpi.
_______________________________________ Configuration 5-9