Printing From Autocad 12 - Xante Assel-a-Writer-8300 Instruction Manual

Printing from AutoCAD 12

After you configure AutoCAD to print from your printer, use the
following procedure to print from AutoCAD.
1. Open your AutoCAD program.
2. Select Plot from the File menu. The Plot Configuration
window appears (fig. B.1).
Device and Default Information
PlateMaker
Device and Default Selection...
Pen Parameters
Pen Assignment... Optimization...
Additional Parameters
Display
Extents
Limits
View
Windows
Views... Window...
Fig. B.1 The Plot Configuration Window
3. Click Device and Default Selection. A pop-up menu appears
with a list of available printers. Choose the printer you
configured with the ADI - 4.2 driver. The pop-up menu
disappears and the selected printer appears in the Plot
Configuration window.
4. Click Size in the Paper Size and Orientation box. A window
appears where you can enter or select the height and width of
the paper you are using.
5. Enter or select the width and height of the paper which you are
going to use respectively in the Width and Height fields. Then,
click OK and the Plot Configuration window appears again.
B-14 Application Notes and Page
Plot Configuration
Paper Size and Orientation
Inches
MM
Plot Area 16.50 By 10.50
Scale, Rotation and Origin
Rotation and Origin...
Hide Lines Plotted Inches = Drawing Units
10.5
Adjust Area Fill
Scale To Fit
Plot Preview
Plot To File
File Name...
Preview...
Cancel
OK
Designbb
Size... User
9
Partial Full
Help
_____________________