Manual Ppd Setup - Xante Assel-a-Writer-8300 Instruction Manual

Manual PPD Setup

Use the following procedure to check or change your printer's PPD
configuration or if the Auto Setup procedure failed.
1. Follow the first three steps in "Configuring the PPD" in the
previous section.
2. Click Select PPD (fig. 3.6). A screen appears from which you
can select a PPD file.
3. Highlight your printer's PPD and click Select. You return to
the PPD setup dialog box (fig. 3.6).
4. Click Configure to open the Installable Options screen (fig. 3.8).
Fig. 3.8 Installable Options Screen
5. Configure the options that are installed or implemented on
your printer. You may need to use a scroll bar to access all of
the options.
a. Select Installed in the menus for the upgrades that are
installed on your printer, such as optional trays, the extra
wide print upgrade, and the optional duplexer
(Accel-a-Writer 8300 only).
b. Select True in the Spooler Enabled menu to enable the
Save Spooled Job menu in your application Print dialog
box.
3-18 Macintosh Setupbb ____________________________________