Call Waiting And Camp-On Ring Tone Over Handset/Headset Option; Initialize Or Adjust Lcd Contrast - Toshiba DP5000-Series User Manual

Call Waiting and Camp-on Ring Tone Over Handset/
Headset Option
Call Waiting and Camp-on tones are sent to a busy telephone's speaker to indicate
that a call is waiting. Call Waiting and Camp-on Tones can be sent, as an option, to
the telephone handset or headset, in addition to the speaker. Follow these steps to
turn handset/headset Call Waiting and Camp-on tone On/Off for a DP5000-series
telephone. The default is Off.
1. Press +
3
2. Press .
0
3. Press Feature Button 4 (FB4) to toggle On/Off.
FB4, LED On: Call Waiting tone
FB4, LED Off: No Call Waiting tone
4. Press
Hold
5. Go off-hook, then on-hook to exit the program mode.

Initialize or Adjust LCD Contrast

‰ To initialize LCD Contrast for the LCD Telephones
1. Press +
3
2. Press
Mode
3. Press
Msg
4. Press
Hold
5. Go off-hook, then on-hook to exit the program mode.
‰ To adjust LCD Contrast for the LCD Telephones
‰ Press and hold down the
repeatedly.
Each time you press
are a total of 13 different contrast levels available.
Strata CIX DP5000-series Telephone UG
+ + (simultaneously).
6 9 Hold
to set the option.
+ + (simultaneously).
6 9 Hold
soft key.
button so that the
. This sets the LCD lightness/darkness contrast to the default setting.
Mic
or
Vol ▲
01/08
LED is On.
Msg
button while you press and release
, the contrast increases or decreases. There
Vol ▼
or
Vol ▲ Vol ▼