Handset Level Adjustments - Toshiba DP5000-Series User Manual

Handset Level Adjustments

Change the Carbon setting if a Carbon type handset or headset is connected to the
handset jack. This feature is not available on the Single Line Telephone (SLT).
‰ To change the Carbon Setting
1. Press
3+6+9+Hold
1. With the handset on-hook, press a DN + the access code assigned in eManager.
2. Press
Spdial
A confirmation tone is heard.
3. Press
FB1
2. Enter the date (YYMMDD).
FB1, LED On: Carbon type handset
3. Press
FB1, LED Off: DP5000 ECM handset (default)
A confirmation tone is heard.
4. Press
Hold
4. Press
(Spkr)
5. Go off-hook, then on-hook to exit the program mode.
The telephone returns to the idle mode.
‰ To adjust the Handset Transmit Level for DP5000-series telephones
1. Press +
3
2. Press
Redial
1. Press DN + the access code assigned in eManager, with the handset on-hook.
3. Set the level using FB1, FB2 and FB3.
For Single Line Telephone, use 1,2,3 and Msg. See table below.
A confirmation tone is heard.
4. Press
Hold
2. Enter the time (HHMMSS) in the 24-hour clock format.
5. Go Off-hook, then on-hook to exit the program mode.
Note H=hour, M=minute and S=seconds. Use leading zeros: 060530 = 6:05AM and
30 seconds; 143045 = 2:30PM and 45 seconds.
3. Press
You hear a confirmation tone.
4. Press
(Spkr)
The telephone returns to the idle mode.
Strata CIX DP5000-series Telephone UG
(simultaneously).
.
to toggle On/Off.
.
(Redial)
to set the option.
.
+ + (simultaneously).
6 9 Hold
.
to set the option.
.
(Redial)
.
01/08