Message Waiting - Toshiba DP5000-Series User Manual

Message Waiting

Message Waiting is shown on the
messages waiting. The waiting message indicators can come from the voicemail sys-
tem or they can be internal messages sent from other extensions.
The messages from other extensions are notifications that someone has called your
extension and wants you to call them back.
An extension can receive up to three Message Waiting indications, one additional
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
indicator will always be reserved for the voicemail system.
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
Note If there are Phantom DN\qs (PhDN\qs) programmed on an extension, each
2. If your telephone does not have a
PhDN can receive up to three message waiting indicators.
Speed Dial bin number (nnn).
‰ Responding to a Lit Msg LED
1. Press Red flashing
voicemail or another extension). See Note below.
2. When call is finished, hang up and the message waiting indicator will be cleared.
3. If the Msg LED continues to flash, there are additional messages to check, repeat
steps 1-2.
Voicemail devices have a short delay in turning off the message waiting indica-
tors.
‰ To manually turn off the Msg LED, press your extension button, then enter #409.
Repeat this sequence until all the messages are cleared.
Table 9 Feature Access Codes
• If there is a + on the LCD, press the
sages sent to that extension.
• To see who has sent you messages, or to retrieve the messages, press the flashing
button.
Msg
Strata CIX DP5000-series Telephone UG
button which will flash red when there are
Msg
Spdial button, press the
button. The telephone will dial the message source (the
Msg
Next
01/08
*
button, then dial the three digit
Soft Key to scroll through the mes-