Turning On/Off Mw Led On Another Extension - Toshiba DP5000-Series User Manual

Table 10 Phone Number Dial String Characters
0~9
0~9
End of Speed Dial Number when entering via access code (
#
Escape. "
*
following represents something exceptional. When
A pause from 1~9 seconds. To pause longer than 9 seconds, enter more pause
*
escape sequences. Example: To insert a 17-second pause, press
(1 ~ 9)
** *
2. Press

Turning On/Off MW LED on Another Extension

When an extension is called, the calling party can choose to send a message to the
called party. This is a notification to say that a call has been missed and the calling
party would like to be called back.
By sending a message to another extension you turn on their Msg LED.
1. Dial an internal extension. You may hear ringing or busy tone.
2. Press
Msg
phone, the Msg LED lights steady red and the LCD shows the station number
where the Message Waiting light was sent to.
5. Press
Spkr
the name that will appear
If you decide to cancel the Message Waiting light at this point, press
in the Personal SD
again while ring-over tone is playing and the light will be cancelled, or if you
directory (nine characters
want to cancel the message later, call the telephone you set the message on and
max).
press twice.
7
You can enter
3. Press
Spkr
alphanumeric characters
flashes until the called party presses the flashing
from the dial pad (shown
back.
right and in Table 11).
4. Turn off the Message LED.
‰ The two ways to turn Off a Message LED are
Strata CIX DP5000-series Telephone UG
*
" functions as an escape key indicating that the number immediately
is entered into the speed dial string.
. "SPEED DIAL MODE" displays on the LCD.
Spdial
or . The Msg LED flashes red on the called telephone. At your tele-
7
, then input
. Your Msg LED turns Off. The Msg LED on the called telephone
01/08
*
• To store #, press
Msg
)
#66
is used as an escape char-
* *
. A "P"
9 8
Msg
*
#
button which calls you
or
7