Storing Personal Speed Dial Names - Toshiba DP5000-Series User Manual

Storing Personal Speed Dial Names

You can store names with Personal Speed Dial numbers. These names will display as
Soft Keys, that can be used for dialing from the telephone LCD directories.
• Speed Dial locations must be assigned to your telephone by your System
Administrator before you can store names. Your System Administrator can also
associate names with Station Speed Dial numbers.
• Only the Administrator telephone can store System Speed Dial numbers.
‰ To assign Station Speed Dial names
1. Enter User Programming Mode by dialing
2. Press
Spdial
1. Press
3. Enter a Speed Dial location number (100~199 for personal speed dial or 200~999
for System speed dial, depending on system programming).
4. Enter the telephone number to be stored. If you normally a dial line access code
(such as
5. Press
Spkr
(nine characters max).
You can enter alphanumeric characters from the dial pad (shown right and in
Table 11).
• To move one character to the right, press
add a space, press the RIGHT Soft Key twice.
• To backspace (delete previous character), press the
• To cycle back to the first letter, continue pressing the LEFT Soft Key.
6. Press
Spdial
7. Go off hook. The telephone exits User Programming Mode.
8. Test the Personal SD entry by pressing the
name in the entry and press the Soft Key associated with that name.
Strata CIX DP5000-series Telephone UG
. "SPEED DIAL MODE" displays on the LCD.
or extension button.
(Cnf/Trn)
) and/or and area code, enter the codes before the telephone number.
9
, then input the name that will appear in the Personal SD directory
. The Speed Dial name is now programmed.
01/08
or, press
#9876 Program
or RIGHT Soft Key. To
SCROLL
or LEFT Soft Key.
PAGE
Personal SD Soft Key. Look for the
.