4ADM/DSS Console
1. Press
+
3
2. Press
.
#
3. Set the headset transmit level using FB1, FB2 and FB3. For Single Line
Telephone (SLT), use 1,2,3 and Msg. See table below.
This chapter provides an overview of the optional units that can be connected to the
DP5000-series telephones (except the Single line telephone).
Add-on Modules
The following Add-on modules provide additional buttons:
• 10 Button LCD Module, up to two supported per telephone.
• 20 Button Add on Module with paper keystrip, up to two supported per tele-
phone.
• Digital Direct Station Selection (DSS) Module with 60 buttons and Paper
Keystrip, up to three supported per telephone.
4. Press
5. Go Off-hook, then on-hook to exit the program mode.
Transmit
Level
+
+
(simultaneously).
6
9
(Hold)
.
(Hold)
Strata CIX DP5000-series Telephone UG
01/08