Speakerphone/Microphone Sensitivity Adjustment - Toshiba DP5000-Series User Manual

Speakerphone/Microphone Sensitivity Adjustment

When you are using the speakerphone, high ambient noise levels may cause the
party you are talking with to be to cut off frequently. If this happens, follow these
steps to lower the sensitivity of the microphone on a DP5000-series telephone. The
default is normal sensitivity.
1. Press + +
3 6 9
2. Press .
0
3. Press Programmable Feature Button 3 (FB3) to toggle On/Off.
FB3, LED On: Lower sensitivity
• Automatic Line Selection (ALS) – ALS is engaged on outgoing calls. Lift the
FB3, LED Off: Normal sensitivity
handset or press
4. Press ALS in enabled. The second line of the LCD will display the method of dialing to set the option.
Hold
available, followed by the digits dialed.
5. Go off-hook, then on-hook to exit the program mode.
• Ringing Line Preference – Answer any incoming call by lifting the handset or
pressing
(Spkr)
call when ringing line preference is enabled.
• Tone First Signaling – Internal incoming calls only: telephone rings in standard
ring tone, lift handset or press
• Voice First Signaling – Internal incoming calls only: a long tone is heard, fol-
lowed by the caller's voice, this will automatically engage the
for hands free communications. Lift the handset if desired (for privacy). When
Voice First Signaling is enabled the telephone does not ring on internal incoming
calls.
• Hot Dialing – Dial a telephone number from the dialpad, the telephone auto-
matically selects a line, shown with a green LED, and turns on the Spkr and Mic
LED's. When Hot Dialing is not turned on the handset should be lifted or Sprk
should be pressed in order to make a call.
+ (simultaneously).
Hold
to hear dial tone, the steady green Line LED indicates
(Spkr)
. There is no need to press the ringing line button to answer the
(Spkr)
to answer call.
Strata CIX DP5000-series Telephone UG
to allow
(Spkr)
01/08