Direct Inward System Access (Disa); Direct Station Selection Buttons (Hotline) - Toshiba DP5000-Series User Manual

Direct Inward System Access (DISA)

Outside callers with touch tone telephones can call in to lines programmed for Direct
Inward System Access (DISA) and dial an extension or outgoing line without going
through an attendant or operator. Check with your System Administrator to see if
this features is available for your telephone.
1. From outside the system, dial the public telephone number assigned to DISA.
The call will be answered and you will hear system dial tone.
If you do not dial within 10 seconds, the line disconnects.
2. When you hear dial tone, dial an extension or an outside line.
3. If you dial an outside destination, you may need to enter a security code provided
to you by the System Administrator. When you hear the tone, enter the security
code. If accepted, the call will proceed.
4. If you receive busy tone and you want to dial another number while the station is
still ringing, press

Direct Station Selection Buttons (Hotline)

This optional feature enables you to use a
Press
(Mic)
station's line extension. The DSS LED shows the status (idle/busy) of the station
You talk to the new caller for as long as you hold down
and/or the station's primary extension. For example, a station's DSS button LED
the button, you return to the original caller. In both cases, neither caller can hear
shows busy (light steady red) when the station is:
the other. Your LCD indicates which station or CO line you are connected to.
• busy on a call on any button
• idle but all appearances of the station's extension are in use by other stations.
When the station is in DND, the LED flashes red.
‰ To connect directly to another station's extension
2. To turn off your microphone speaker to the second party, you can press
1. When connected to a line or another station, press
or
Microphn Cut-off
the second caller, although he/she can still speak through your speaker.
The original party is put on-hold. You can call a station even if the DSS LED
shows busy (steady red).
3. Press
(Mic)
You can toggle as often as you choose. If you do not want the first caller to hear
2. Announce the call...or transfer the call by hanging up or pressing
your conversation with the second caller, cover the mouthpiece of your handset.
Note You can transfer the call to an idle or busy station.
and repeat Step 2.
*
to toggle between the new and original callers.
; the Mic LED turns Off. You will no longer be talking to
or
Microphn Cut-off
button to connect directly to another
DSS
(Mic)
.
DSS
again to reconnect to the second caller.
Strata CIX DP5000-series Telephone UG
. When you release
(Mic)
.
Release
01/08