Advertisement
Quick Links
R
M
R
VXR-9000
O
M
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VXR-9000 FM R
O
M
Advertisement
Related Manuals for Yaesu VXR-9000
Summary of Contents for Yaesu VXR-9000
- Page 1 P.O. Box 75525, 1118 ZN Schiphol, The Netherlands YAESU UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K. VERTEX STANDARD HK LTD. Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VXR-9000 FM R...
- Page 2 VXR-9000 FM R...
- Page 3 Designed to mount in a standard 19-inch rack, the VXR-9000 is crafted using the latest computer-aided design and manufacturing processes, to ensure a high level of reliability to users. Important channel frequency data is stored in EEPROM, and is easily programmable by a Servicing Technician or Dealer using an IBM compatible personal com- puter and the VPL-1 Programming Cable and CE60 Software.
- Page 4 The possible PF key features and func- The internal speaker is located here. tions are explained on the pages to follow. VOL Knob This control knob adjusts the output level of the front speaker and external speaker jack on the back panel. VXR-9000 FM R...
- Page 5 Programming of the callsign is performed by your VER- range of the repeater’s transmitted and received audio TEX STANDARD dealer. signal. When you enable this function, the signal-to- noise ratio can be improved by reducing the transmit- ted audio dynamic range. VXR-9000 FM R...
- Page 6 POWER switch “off” and “on”) the repeater. Press (or Press and hold in for one second) the PF key assigned to “Local PTT” to enable (“On”) or disable (“Off”) operation using a PTT switch connected to the front panel’s Microphone Jack. VXR-9000 FM R...
- Page 7 Press (or Press and hold in for one second) the PF key assigned to “Transmit” to enable (“On”) or disable assigned to “Squelch” to override the Squelch action (“Off”) the transmission of the VXR-9000. (CTCSS, DCS, and Noise Squelch), so as to hear any sig- nal present on the operating channel.
- Page 8 Each port may be programmed as to its function, its status (input or output), and its logic output signal, for connection to the transmitting antenna, or the “TX” jack on the duplexer. The out- (for output ports only). put impedance requirement is 50 Ohms. VXR-9000 FM R...
- Page 9 DB-25 C Pin 5: TX ATT The VXR-9000 repeater is provided with a 25-pin DB- 25F female connector for interconnections to This output is intended for controlling an external co- accessories.Use a DB-25M 25-pin male connector to con- axial switching relay. It is an open drain output which nect accessories to the repeater.
- Page 10 DATA C Pin I/O Port ( Max.: 5 kHz ) The VXR-9000 provides eight ports (PIO) This pin is an output for high speed receiving data sig- that can be programmed for various nals (typically 9600 bps), with the data being extracted...
-
Page 11: Antenna Considerations
Antenna Considerations Equipment Location Repeater operation requires two antennas, one for re- The VXR-9000 must be installed in a 19-inch Mounting ceiving and one for transmitting, so that the receiving Rack, which will allow for free air flow around the heat antenna does not absorb energy from the transmitting sink on the rear apron at all times. -
Page 12: Backup Power Supply
Power Supply Backup Power Supply Operation of the VXR-9000 requires a power source ca- For uninterrupted operation during power failures, a pable of providing at least 12 Amps continuously at 12-volt rechargeable type battery (55-Ah or more rec- 13.6 Volts DC. The FP-1023 (23 A) and FP-1030A (30 A) -
Page 13: Supplied Accessories
DC Power Cord (T9023499) ..........1 FIF-9 Inline Interface Box 15-A Blade Fuse (Q0000075) ........... 1 FVP-25 Encryption Unit Knob Cap (RA0506900) ........... 1 FVP-35 Rolling Code Encryption Unit Operating Manual ............1 MD-11 Desktop Microphone MH-27 Hand Microphone VXR-9000 FM R... - Page 14 5 mV Audio Frequency Response: Pre-emphasis : 6dB/oct (From 300 Hz to 3 kHz) Spurious Emission: 70dB below carrier Audio Distortion: 3.0 % @1 kHz Microphone Impedance: 600 ohm Specifications subject to change without notice or obligation. VXR-9000 FM R...
- Page 15 Part 15.21: Changes or modifications to this device not expressly ap- proved by Vertex Standard could void the user’s authorization to operate this device. VXR-9000 FM R...
- Page 16 Copyright 2004 No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. All rights reserved. VERTEX STANDARD CO., LTD. Printed in Japan 0311J-0E VXR-9000 FM R...