Setting The Tot (Timeout Timer); Setting Other Configuration; Setting The Repeater For Remote Operation; Turning Transmission On/Off From The Remote Controller - Yaesu DR-1 Operating Manual

Setting up the Repeater

Setting the TOT (timeout timer)

1
Touch [F] in the setup mode screen
The setup menu will appear.
2
Touch [TOT]
The menu list will appear.
3
Touch [▲] or [▼]
The set value will change in the following sequence each time it is touched.
"OFF" → "30sec" → "1min" → "1.5min" → "2min" → "2.5min" → "3min" → "4min" →
"5min" → "10min"
Tip Factory default: 3min
4
Touch [BACK]
The setting is determined and the display will return to the setup menu.
The set value will be displayed below [TOT] on the menu.

Setting other configuration

Setting the repeater for remote operation

See page 23 for details.

Turning transmission ON/OFF from the remote controller

See page 22 for details.
32