Switching The Tone Signal Types - Yaesu DR-1 Operating Manual

4
Touch [▲] or [▼]
The set value will change each time it is touched.
Tips • DCS codes between 023 and 754 can be selected.
• Factory default: 023
5
Touch [BACK]
The setting is determined and the display will return to the setup menu.

Switching the tone signal types

1
Touch [F] in the setup mode screen
The setup menu will appear.
2
Touch [SQL] in the setup menu
The menu list will appear.
3
Select [RX SQL] to set the tone signal type during reception, or select [TX SQL] to set
the tone signal type during transmission
4
Touch [▲] or [▼]
The setting will change in the following sequence each time it is touched.
"OFF" → "TONE" → "DCS"
Tip Factory default: OFF
5
Touch [BACK]
The setting is determined and the display will return to the setup menu.
Setting up the Repeater
27