TEC B-SP2D Series Maintenance Manual page 72

7. WIRELESS LAN PARAMETER SETTING
7.2.3 Wireless Page
The parameter settings associated to the wireless LAN module can be browsed or changed.
Operating Mode:
The SSID:
Channel:
EAP Authentication:
User name for EAP:
Password for EAP:
WEP Enabled:
WEP Key length:
WEP Key 1 – 4:
WEP key to use:
Shared key Authentication:
Power save timeouts:
For details, refer to Section 7.2.9.
NOTE: The entered data are displayed as " • • • • " on the browser for security. (Wireless LAN module
version V1xx.)
Connection mode
SSID to be used.
Channel to be used in Adhoc mode
Security protocol to be used.
User name to be used for the security protocol (See NOTE.)
Password to be used for the security protocol (See NOTE.)
Whether WEP is enabled or disabled.
WEP key length
WEP keys #1 to #4 (See NOTE.)
WEP key to be used for transmission
Whether the shared key authentication mode is enabled or disabled.
When it is disabled, the authentication will be open system.
Time that the wireless LAN module takes to enter the power save mode.
7-12
EO18-33014
(Revision Date: Oct. 26, 2004)
7.2 WHEN USING THE WEB BROWSER