TEC B-SP2D Series Maintenance Manual page 63

7. WIRELESS LAN PARAMETER SETTING EO18-33014
(Revision Date: Oct. 26, 2004)
7.1 WHEN USING THE RFLAN CONFIGURATION TOOL
3 Run the parameter setting application, RFLAN Configuration Tool, on the PC.
NOTE: While the RFLAN Configuration Tool is communicating with the wireless LAN module, do not
switch the active window to another application.
4 Confirm that the settings of the application are as follows:
Control port of the Com Settings is IrDA: TEC Protocol.
The port number to which the ACT-IR220+ is connected is selected for the Com Settings Port.
7-3