Table of Contents
Advertisement
2. MAIN UNIT REPLACEMENT
7)
Remove the two SMW-2.6x6 screws to remove the cutter plate from the media cover.
Media Cover
8)
When replacing the print head FPC, sensor 1 FPC, or sensor 2 FPC, follow Step 9 and after.
9)
Remove the bottom cover, top cover, CPU PC board, drive PC board, stepping motor ass'y, and gears.
For the GH40 model, also remove the wireless LAN module and gear cover.
(Refer to Sections 2.1 REPLACING THE CPU PC BOARD AND WIRELESS LAN MODULE, 2.2 RE-
PLACING THE DRIVE PC BOARD AND THE STEPPING MOTOR ASS'Y, and 2.3 REPLACING THE
PLATEN.)
2.4 REPLACING THE PRINT HEAD, CUTTER, AND SENSORS
Cutter Plate
SMW-2.6x6 Screw
Cutter Plate
2-12
EO18-33014
(Revision Date: Jan. 29, 2004)
Advertisement
Table of Contents
