Table of Contents
Advertisement
2. MAIN UNIT REPLACEMENT
13
Print tone & Print start position
ADJ.
+00
+0.0mm
NOTE: Setting value for the Print Position Fine Adjustment
When the setting value is x.3 mm, the value will be automatically changed to x.2 mm. In
the same way, x.8 mm will be changed to x.7 mm. This is because the print head's dot
density is 8 dots/mm.
14
Auto power off
P/W
120min
15
Versions of the forms No.1 to No.20
FORM 0000000000
16
Print mode
MODE
17
Printer parameter
PARA
Print tone fine adjustment
Print position fine adjustment
Auto power off (1min, 5min, 30min, 120min)
0000000000
Versions of the form No.10 (top) and No.20 (bottom)
Versions of the form No.9 (top) and No.19 (bottom)
Versions of the form No.8 (top) and No.18 (bottom)
Versions of the form No.7 (top) and No.17 (bottom)
Versions of the form No.6 (top) and No.16 (bottom)
Versions of the form No.5 (top) and No.15 (bottom)
Versions of the form No.4 (top) and No.14 (bottom)
Versions of the form No.3 (top) and No.13 (bottom)
Versions of the form No.2 (top) and No.12 (bottom)
Versions of the form No.1 (top) and No.11 (bottom)
LABEL
Print mode (LABEL, RECEIPT, RECEIPT1, TPCL-LE)
[PC850]
[0]
Without zero slash
Character code
2-22
EO18-33014
(Revision Date: Jan. 29, 2004)
2.6 TEST PRINT
Advertisement
Table of Contents
