Table of Contents
Advertisement
2. MAIN UNIT REPLACEMENT
4)
Remove the FPC harness from the head connector while being careful not to touch the print head element.
FPC Harness
5)
Remove the SMW-2.6x6 screw to remove the print haed from the print head plate.
6)
Release the two hooks which are provided at the inside of the media cover, and then remove the blind plate.
Media Cover
Head Connector
SMW-2.6x6 Screw
Hook
2.4 REPLACING THE PRINT HEAD, CUTTER, AND SENSORS
Print Head
2-11
EO18-33014
Print Head Plate
SMW-2.6x6
Screw
Blind Plate
Advertisement
Table of Contents
