Table of Contents
Advertisement
2. MAIN UNIT REPLACEMENT
3. Before reassembling the gears, wipe away dusts, stain or dirt on the gears with a clean cloth. Also
apply FLOIL G-488 to each gear' shaft and the portion between the motor gear and the motor idler
gear.
4. After reassembling the gears, manually rotate the gears to make sure that they works properly.
5. Make sure of the orientation of the gears, and then reassemble them in the following order; 1. platen
idler gear, 2. motor idler gear, 3. idler gear.
1. Platen Idler Gear
2.2 REPLACING THE DRIVE PC BOARD AND THE STEPPING MOTOR ASS'Y
3. Idler Gear
2. Motor Idler Gear
2-7
EO18-33014
(Revision Date: Jun. 13, 2003)
Advertisement
Table of Contents
