TEC B-SP2D Series Maintenance Manual page 20

2. MAIN UNIT REPLACEMENT EO18-33014
2.4 REPLACING THE PRINT HEAD, CUTTER, AND SENSORS
17) Unhook the lower media cover switch, which are provided for the sens 2 PC board, from the frame.
Frame
Media Cover Switch
18) Remove the lower media cover switch with the sens 2 PC board from the frame.
Frame
Sens 2 PC Board
Media Cover Switch
19) After replacing the print head, cutter, and sensors with the new one, reassemble in the reverse order of
removal.
NOTES: 1. Reassemble the cover springs properly when attaching the media cover shaft.
Cover Spring
Media Cover Shaft
2-16