Table of Contents
Advertisement
7. WIRELESS LAN PARAMETER SETTING
5. Parameters to be set are shown in boldface on the screen of the RFLAN Configuration Tool. Those to
be omitted are shown in normal style and skipped when the parameter settings are downloaded. This
makes the download time shorter.
Whether to set the parameter or not can be switched alternately by double-clicking. (Applicable from
the RFLAN Configuration Tool V1.1.)
6. Clicking on the [Send Para] button disables the [Get Para], [Send Para], and [Restore] buttons until
the parameter settings have been downloaded to the wireless LAN module.
SE Settings
Country:
Country where the printer is used. (Default: EU)
EU: Europe
US: America
FRA: France
ESP: Spain
JA: Japan
NOTE: Since the frequency band of the wireless LAN is different from country
to country, it is necessary to set the country. To set the country, a
password entry is required. Click on the Help(H) menu and then SE
Mode, the password entry screen will appear. Type in "B-SP2D" and
click on the [OK] button.
Select the country on the screen.
NOTE: When the country is changed, selectable channels are also
changed. After changing the country, be sure to set the
available channel. (Applicable from the RFLAN Configuration
Tool V1.1.)
7-6
(Revision Date: Oct. 26, 2004)
7.1 WHEN USING THE RFLAN CONFIGURATION TOOL
Country
Available channel
EU
1 to 13
US
1 to 11
FRA
10 to 13
ESP
10 to 11
JA
1 to 14
EO18-33014
Advertisement
Table of Contents
