TEC B-SP2D Series Maintenance Manual page 65

7. WIRELESS LAN PARAMETER SETTING
Save
Click on the File menu and select the Save(S) to show the File save
screen. Name the file and save.
Load
Click on the File menu and select the Load(L) to show the File load
screen. Specify the file name and load it.
NOTE: On the RFLAN Configuration Tool screen, parameters to be set
are shown in boldface and those to be omitted (skipped) are
shown in normal style. These are also saved or loaded.
(Applicable from the RFLAN Configuration Tool V1.1.)
4. Description of each parameter
Firmware version of the wireless LAN module
ROM Version:
TCP/IP setting
IP Address:
Gateway Address:
Subnet Mask:
LPD:
Socket:
Socket Port:
DHCP:
DHCP ID:
HOST:
WINS:
WINS Server Address: WINS server address (Default: 0.0.0.0)
RF-LAN Basic Settings
ESS ID:
Connection Mode:
Channel:
Authentication:
ROM version No. of the printer
IP Address (Default: 172.16.xxx.xxx)
Setting value: xxx.xxx.xxx.xxx
Gateway IP Address (Default: 0.0.0.0)
Setting value: xxx.xxx.xxx.xxx
Subnet Mask (default: 255.255.0.0)
Setting value: xxx.xxx.xxx.xxx
Whether LPD protocol is enabled or disabled. (Default: Enabled)
: Disabled
: Enabled
Whether Socket communication is enabled or disabled. (Default: Enabled)
: Disabled
: Enabled
Port No. to be use for socket communication (Default: 8000)
Setting value: 0 - 65535
Whether DHCP Client Protocol is enabled or disabled. (Default: Disabled)
: Disabled
: Enabled
Client ID to be notified to the DHCP server when using DHCP
(Default: MAC Address)
Host name to be notified to the host when using DHCP, WINS Protocol
Max. 32 bytes (Default: MAC Address)
Whether WINS Protocol is enabled or disabled, and WINS Server address
(Default: OFF)
Disable: OFF
ON (STATIC): WINS Server assigned is used.
ON (DHCP): WINS Server notified by the DHCP Server is used.
Setting value: xxx.xxx.xxx.xxx
ESS ID (Network Name) (Default: TOSHIBA TEC)
Max. 32 bytes
Connection mode (Default: Infrastructure)
Infrastructure mode
Adhoc mode
Channel to be used for Adhoc communication (Default: 1)
Channel No. using only Adhoc mode
Authentication method (Default: Open system)
Open system
Shared key
7.1 WHEN USING THE RFLAN CONFIGURATION TOOL
Printer ID
7-5
EO18-33014
(Revision Date: Oct. 26, 2004)