TEC B-SP2D Series Maintenance Manual page 42

4. PROGRAM DOWNLOAD
4. By following the messages on the screen, perform the installation.
5. When the installation was completed successfully, the end screen appears. Click on the [Finish] button to
end the installation.
4.1.3 Firmware Files Copy
If it ever becomes necessary to upgrade the firmware in the B-SP2D printer you will be supplied with a floppy
disk containing the latest firmware revision similar to that shown below.
The files contained on the Install Kit can be copied to PC hard disk and then downloaded to the printer.
4.1.4 Running the Download Program for B-SP2D
1. Click on the [START] button to access the program menu.
2. Highlight Programs then highlight TOSHIBA TEC, B-SP2D, Download. And then click on Download
Program for B-SP2D in the screen display below.
3. The screen will change to display the initial screen of the Download Program as shown below.
4. After the download was completed successfully, from the [File(F)] drop down menu select [Exit(X)], and
then click on the [OK] to terminate the download.
4.1 PROGRAM DOWNLOADING TO A WINDOWS MACHINE
(Example)
B-SP2D Series
FIRMWARE(MAIN) V1.0
WR.FD-SP2D-FIRM
SP2D-MAIN-V10-Z920-E8.BIN
7FM00451000:E800
10th March 2003
V001.000
Copyright2003
TOSHIBA TEC CORPORATION
All Rights Reserved
4-2
EO18-33014