TEC B-SP2D Series Maintenance Manual page 67

7. WIRELESS LAN PARAMETER SETTING
RF-LAN Security Settings
WEP Type:
Send Key:
Security:
Key #1 to #4:
User:
Pass:
For details of each parameter, refer to Section 7.2.9.
7. After setting the parameters, click on the Close button to exit the appliation.
8. Press and hold the Power button on the pritner to turn it off.
Whether WEP key is enabled or disabled. (Default: OFF)
Disable: OFF
ON (40 bits): Enabled (The length of the WEP Key is 40 bits)
ON (140 bits): Enabled (The length of the WEP Key is 104 bits)
WEP key number to be used for transmission
1: Key #1
2: Key #2
3: Key #3
4: Key #4
Security mode (Default: OFF)
OFF: Disabled
MD5: MD5
LEAP: LEAP (Applicable from the RFLAN Configuration Tool is V1.1.)
Setting for WEP Keys #1 to #4 (Default: 0000 [NUL 13 bytes])
When the WEP Type is set to 104 bits, the all bits are effective. When set to
40 bits, the top 40 bits (5 bytes) only are effective.
Key #1
Key #2
Key #3
Key #4
User name to be used for authentication (Default: 0000 [NUL 32 bytes])
Max. 32 bytes
Password to be used for authentication (Default: 0000 [NUL 32 bytes])
Max. 32 bytes
NOTE: The entered password is displayed as "*****" on the screen.
7-7
7.1 WHEN USING THE RFLAN CONFIGURATION TOOL
5 bytes 13 bytes
EO18-33014
(Revision Date: Oct. 26, 2004)