Unpacking; Procedure; Checks - TEC B-SP2D Series Maintenance Manual

1. UNPACKING

1. UNPACKING

1.1 PROCEDURE

1) Open the carton.
2) Unpack the accessories from the carton.
3) Unpack the printer.
Owner's Manual
B-SP2D Printer
Carton
NOTES: 1. Keep the carton and pad for future transportation of the printer.
2. Since the power cord set is not enclosed in this battery charger unit, please purchase an approved
one which meets the standard for each country from your Authorized TOSHIBA TEC representative.
For details, please refer to the B-SP2D-CHG Owner's Manual.

1.2 CHECKS

1) Check for damage or scratches on the machine.
2) Confirm that none of the accessories are missing.
SMW-3x8 Screw Cord Clamp
SMW-3x8 Screw
Outer Winded Guide
[ Printer and Accessorry ]
1-1
Accessory
(GH20 Type only)
Belt Holder
Battery
[ Battery Charger ]
EO18-33014
1.1 PROCEDURE
Media Guide
Owner's Manual
Battery Charger
(B-SP2D-CHG-QM)
Carton