Support Wheels - Permobil K300 Service Manual

Support Wheels

Support wheels may be fitted in three different
positions; low, medium and high. These fitting
positions are marked L, M and H.
Low
With the support wheels fitted in the lower position,
low, the wheelchair inclines less before the support
wheels meet the ground, but the accessibility of
the wheelchair is reduced somewhat.
Medium
With the support wheels fitted in the medium
position, the wheelchair inclines slightly more
before the support wheels meet the ground, but
the accessibility of the wheelchair is increased
somewhat.
High
The support wheels are fitted as standard in the
high position. This position produces the best
accessibility, but it also means that the wheelchair
may incline more before the support wheels meet
the ground, which the user may find unpleasant.
Removal
1. Switch off the main power switch on the control
panel.
2. Remove the screw. See figure.
m
WaRnIng
Removing the support wheels entails an increased risk of the
wheelchair tipping over. The wheelchair must not be driven
when the support wheels are not fitted.
Fitting
1. Switch off the main power switch on the control
panel.
2. Fit the wheel with the screw, washer and nut in
the desired position. See figure.
Support wheels may be fitted in three different
positions; low, medium and high.
15
Rear Wheels