Speed And Distance; Overview - Beurer PM 70 Operating Instructions Manual

S
PEED AND DISTANCE

Overview

IMPORTANT: All settings in this menu only have
an effect if the Speedbox is used!
You can also use the Speedbox only to measure
your pace.
In the
Spd'nDist
Change the speed units. In the basic setting
[cm], you can change from [km/h] to [min/km],
in the basic setting [inch] from [mi/h] to
[min/mi].
Calibrate the Speedbox.
Specify a target distance and a target time
which you want to run during the training ses-
sion. Your HR monitor will calculate the target
speed from these values. You can have this
displayed as a target in the
and compared with your current training val-
ues. In this way you can continually control
the deviations from your set target speed dur-
ing the training session.
With
tances can be displayed in the bottom line.
As soon as you are in the
HR monitor changes automatically into the main
display. This displays the current speed in the
middle line. The bottom line displays the average
heart rate.
menu you can:
, information on the speed/dis-
Spd'nDist
36
menu
menu, your