Display Speed/Distance - Beurer PM 18 Operating Instructions Manual

Press the MODE button in the main menu Training Mode for approx.
5 seconds. You get into the setting menu; move on to the next setting
by pressing the MODE key. The settings flash if you can change
them. Change the settings with the START/STOP/RESET and
SELECT buttons. Confirm with the MODE button.
Then leave the setting menu again by keeping the MODE button
pressed for approx. 5 seconds.
Tip: If you keep the START/STOP/RESET and SELECT buttons
pressed for more than 2 seconds, the relevant setting automatically
counts forwards or backwards.

Display speed/distance

In the bottom line of the display, you can generally select between the
two main displays (speed and distance) as well as automatically
switch between these main displays. If you prefer to use one particu-
lar display, then you can keep this for your entire run.
If you press the SELECT button in training mode for 2 seconds, you
can switch the display between speed (SP) and distance (DI). If you
15
G
B