Beurer PM 70 Operating Instructions Manual page 41

Start running.
START/STOP
CAL 000 Run
Run a distance where you know the
exact length (reference distance).
For example 4 stadium laps = 1600
m. Your monitor will display the dis-
tance (meters) in the middle line
during the run.
Please note that the calibration only
applies to the relevant type of pace.
If you change the type of pace, then
this has an effect on the accuracy of
the speed and distance recordings.
End your run. The HR monitor dis-
START/STOP
plays the measured length of the
distance, e.g. 1596 m.
If the displayed value is lower
than the distance covered, in-
crease the value with
If the displayed value is higher
than the distance covered, de-
crease the value with
If the calibration was successful
START/STOP
CAL OK
is displayed.
is displayed.
39
MENU .
OPTION/SET .
G
B