Beurer PM 70 Operating Instructions Manual page 14

4
Check the seal. The seal has to lie flat
in the casing of the monitor and there
must be no visible damage to it. The
impermeability of the monitor cannot be
guaranteed otherwise.
5 Turn the lid clockwise with your fingers
without pressure for at least one turn
until the lid is level with the battery com-
partment.
Caution! Do not continue to turn
the lid, if it cannot be turned into
the battery compartment without
resistance. Repeat the process
after changing the position of the
lid. The thread could be dam-
aged otherwise.
6
Tighten the lid with the coin until it stops
so as to guarantee continued imperme-
ability.
7 The monitor is now in power-saving
mode and only displays the current time
and the date.
Press the
the HR monitor.
START/STOP button to activate
12