Transmission Of Signal And Methods Of Devices Measurement - Beurer PM 70 Operating Instructions Manual

T
RANSMISSION OF SIGNAL AND METHODS OF
UREMENT
Receiving range of the heart rate monitor
Your heart rate monitor picks up the heart rate signals sent by the
chest strap transmitter within a range of 70 centimeters.
Your HR monitor receives the signals from the Speedbox within a
range of three meters.
Sensors on the chest strap
The entire chest strap consists of two components: the actual chest
strap and an elastic tension belt. On the inside of the chest strap
contacting the body, there are two rectangular, corrugated sensors.
Both sensors determine your heart rate ECG exactly and transmit
this to the heart rate monitor.
The digital transmission works almost without interference. Your HR
monitor only receives the signal from the corresponding transmitter.
There can be no interfering signals from other transmitters.
The chest strap is not compatible with analogue devices, such as
e.g. ergometers.
Signal transmission from the diagnostic scale
The Beurer Diagnostic Scales BG56 are also available at special-
ised dealers and offer additional options for comprehensive weight
management. You can measure your current weight and your body
fat at any time with the scale and transmit them to the HR monitor.
The weight values registered manually in the HR monitor are then
updated by the values of the scale.
9
D M
EVICES EAS-
G
B