Pairing The Signals From The Device - Beurer PM 70 Operating Instructions Manual

Pairing the signals from the device

The digital transmitter and receiver have to be paired. If you buy
each device separately, e.g. as a replacement, or if you change the
batteries, then you have to pair the devices before use.
The devices have to be switched on for this operation. To do this put
on the chest strap, activate the Speedbox and switch on the scale by
pressing it slightly with your foot.
Change into the
MENU
Limits
OPTION/SET
Units
OPTION/SET
Pair NewDev
OPTION/SET
Hr Search
START/STOP
monitor starts to search for the de-
vices. You can follow the success of
the search on the display:
HR-Belt
has been successfully connected.
SPD Dev
has been successfully connected.
Scale
successfully connected. If the scale
has switched itself off automatically
in the meantime, then switch them
on again.
Setting
is displayed.
is displayed.
is displayed.
is displayed. Your HR
signals that the chest strap
signals that the Speedbox
signals that the scale has been
24
menu.