Technical Specifications And Batteries; Replacing The Batteries - Beurer PM 70 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

T
ECHNICAL SPECIFICATIONS AND BATTERIES
HR monitor
Chest strap
Battery HR monitor
Battery chest strap

Replacing the batteries

You can change the batteries of the HR monitor and the chest strap
yourself. Please read how to change the battery in your HR monitor
in Chapter "Getting started", Section "Insert battery/Change battery".
The battery compartment of the chest strap is on the inside of the
chest strap. Use a coin or the battery to open the compartment. The
positive pole (+) of the battery inserted must face upwards. Carefully
close the battery compartment again.
Waterproof to 30 m (suitable for
swimming)
The
impermeability
monitor to moisture cannot be
guaranteed if you jump into
water (high pressure load) and
also if the buttons are pressed
in the rain.
Waterproof (suitable for swimming)
3V lithium battery, type CR2032 (Rec-
ommendation: Energizer batteries).
The service life is approx 11 months if
the monitor with pulse display is used
for 1 hour daily. In addition, activated
functions such as e.g. acoustic alarm
or activated LED display could reduce
the service life of the battery by half.
3V lithium battery, type CR2032
Service life: approx 28 months
53
G
B
of
the

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents