Transmission Of Signal And Methods Of Devices; Measurement; Getting Started; Putting On The Heart Rate Monitor - Beurer PM 52 Operating Instructions Manual

T
RANSMISSION OF SIGNAL AND METHODS OF
UREMENT
Receiving range of the heart rate monitor
Your heart rate monitor picks up the heart rate signals sent by the
chest strap transmitter within a range of 70 centimeters.
Sensors on the chest strap
The entire chest strap consists of two components: the actual chest
strap and an elastic tension belt. On the inside of the chest strap
contacting the body, there are two rectangular, corrugated sensors.
Both sensors determine your heart rate ECG exactly and transmit
this to the heart rate monitor. When using a textile chest strap,
please take note of the information in the directions for use of the
textile chest strap.
The chest strap is compatible with other analogue devices, such as
e.g. ergometers.
G
ETTING STARTED

Putting on the heart rate monitor

You can wear your heart rate monitor like a wrist watch. In order to
fix the heart rate monitor on bike handle bars, attach the bike mount
included to the handle bars. Tighten the heart rate monitor around
the mount such that it is not able to slip while riding.

Activating the HR watch from transport mode

During transport the monitor is blank. You can remove the transport
mode by pressing the button MENU and then
9
D M
EVICES EAS-
.
START/STOP
G
B