Lattice Semiconductor ispClock5400D User Manual page 5

Lattice Semiconductor
2. Set DIP switches SW1 3 and 4 ON and all other switches OFF.
The blue LOCK LED lights to indicate the on-chip PLL is stable and locked to a reference clock.
3. Start PAC-Designer.
4. Choose File > Open...
The Open dialog appears.
5. Browse the Base_Demo_CLK5406D.PAC project and choose Open.
The ispPAC-CLK5406D schematic view appears.
Figure 2. ispClock5406D Schematic View
6. Choose File > Save As.
The Save As dialog appears.
7. Specify File name: Base_Demo_CLK5406D_rev.PAC and click Save.
PAC-Designer creates a new revision of the project.
8. Choose View > ispCLK Output Summary.
The Output Summary Sheet appears. The default demo will monitor the LVDS outputs driven by BANK_0 and
BANK_2.
Figure 3. Output Summary Sheet
ispClock5400D Evaluation Board
5
User's Guide