Lattice Semiconductor ispClock5400D User Manual page 23

Lattice Semiconductor
Figure 23. USB Settings Dialog Box
6. Enable Connect at startup and click OK.
An information dialog appears. After altering the USB setting within these dialog boxes, PAC-Designer must be
restarted to load the port drivers for the system.
Figure 24. PAC-Designer JTAG Prompt
7. Click OK to dismiss the message.
8. Close PAC-Designer.
Programming the Evaluation Board
To repgrogram the ispClock5400D Evaluation Board:
1. Run PAC-Designer.
2. Open the <demo>.pac project file.
3. Choose Tools > Download
The Frequency Summary dialog appears and reports the Reference and VCO frequency settings.
ispClock5400D Evaluation Board
23
User's Guide