C H A P T E R
Maintenance
6.
6.1
Introduction
Module specific calibration can be found in the module's manual. There is no
calibration on the main frame. Do not attempt to remove the cover.
6.2
Fuse Replacement
The fuses are accessible on the back panel of the 6000. Before replacing a fuse, turn
power off and disconnect the line cord. Use only the fuses indicated below.
Line Voltage
90-110 VAC
108-132 VAC
198-242 VAC
216-250 VAC
6.3
Cleaning
Use mild soap solution on a damp but not wet cloth. Disconnect AC power before
cleaning.
6
Fuse Replacement
2.5 Amp, 3 AG, Slo-Blo, 250V
2.5 Amp, 3 AG, Slo-Blo, 250V
1.25 Amp, 3 AG, Slo-Blo, 250V
1.25 Amp, 3 AG, Slo-Blo, 250V
71